Designed as a cost-effective solution specifically for sound contractors, the ISA Series includes seven models with four low impedance models (ISA 280, ISA 450, ISA 750, ISA 1350) rated for 2-ohm operation, and three "Ti" versions with isolated 25, 70 and 100 volt outputs for distributed audio systems (ISA 300Ti, ISA 500Ti, ISA 800Ti).
The "Ti" versions will drive 8 or 4 ohm loads and a distributed system on the same channel simultaneously. This enables a contractor to reduce the number of required amplifier channels by allowing a limited number of distributed speakers to be attached to the same amp as is powering the main sound system.
Housed in a rugged 3-U chassis, all seven models feature rear panel gain controls for tamper resistant operation with 2 dB detents for quick and repeatable settings. Inputs include both XLR and detachable Euro-style connectors. Outputs feature covered barrier strip connectors for safety agency compliance, and for added versatility, a DataPort V2 (Version 2) terminated with an HD-15 connector is provided for use with DPV2-compatible signal processing accessories such as the XC-3 Crossover, SF-3 Subwoofer Filter, LF-3 Low Frequency Filter and the DSP-3 with external power supply.
|Output power (20 Hz-20kHz THD+N=01%) 4ohms||2 x 650W|
|Output power (20 Hz-20kHz THD+N=01%) 8ohms||2 x 450W|
|Output power (20 Hz-20kHz THD+N=01%) 4ohms bridged||2400W|
|Output power (20 Hz-20kHz THD+N=01%) 8ohms bridged||1500W|
|Output power (20 Hz-20kHz THD+N=01%) 2ohms||2 x 1200W|
|Input sensitivity Att. Max @ 8ohms||1.07v (+3.4 dBu)|
|Amplifier type||Low impedence|
|Input connectors||XLR, Phoenix|
|Output connectors||Barrier strip|
|Dimensions (W x H x D)||3U x 400mm|
|Distortion (THD full rated power 8 ohms)||<0.01%|
|Market Sector||Place of Worship, Education, A/V Corporate, Commercial|