Pro Audio Systems

• Technical Specifications

• System Acoustic
• –3dB response 130 Hz -18 KHz
• –10dB response 85 Hz - 20 KHz
• Max SPL long-term 131 dB
• Max SPL Peak 134 dB
• Crossover Points 130 Hz, 500 Hz, 2.5 kHz
• Speaker Input
• Panel Connector Type Amphenol AP-6 Male
• Required Cable Mounted Connector Amphenol AP-6 Female
• Loop-Through Output None
• General Horn Specs
• Overall Dimensions 15.78” x 15.78” (401mm x 401mm)
• Type Integrated High / Mid - Rotatable
• HF Compression Driver
• Number of Drivers 1
• Diaphragm Size 1.75 ” (44mm)
• Throat Exit Diameter 1.0 ” (24.5mm)
• Phase Plug Patented – Complex Geometry
• Diaphragm Material Titanium
• Magnet Type Neodymium
• HF Horn Design
• Horizontal Coverage 90° 1 kHz to 16 kHz avg.
• Vertical Coverage 40° 1 kHz to 16 kHz avg.
• Type Constant Directivity
• Mouth Size 12.87” x 5.53” (327 mm x 140 mm)
• Throat size 1.0” (2.54 cm)
• Midrange Speaker
• Number of Drivers 1
• Size 6.00” (152.4mm)
• Cone Material Fiber reinforced
• Voice Coil Diameter 1.75”(44mm)
• Magnet Type Neodymium
• Cooling Integrated aluminum finned heatsink
• Midrange Horn Design
• Horizontal Coverage 90° 500Hz to 2.5kHz avg.
• Vertical Coverage 40° 500Hz to 2.5kHz avg.
• Type Constant Directivity
• Mouth Size 12.87” x 8.62” ( 327mm x 219mm)
• Throat Exit Diameter 5.19” (132mm)
• Phase Plug Diameter 2.28” (58mm)
• Mid Bass Section
• Number of Drivers 1
• Acoustic Design Horn-loaded
• Woofer Size 12.00”(300mm)
• Voice Coil Diameter 3.00”(76mm) Inside/Outside epoxy baked
• Wire Type Copper-clad aluminum
• Cone Material Epoxy-reinforced cellulose
• Magnet Type Neodymium
• Construction Features
• Basic Geometric Design Rectangular
• Material 15mm Exterior Grade Baltic Birch
• Finish Ultra wear-resistant black polymer coating
• Hardware Two (2) corner handles
• Two (2) Side Handles
• Four (4) integrated “L” brackets
• Eight (8) M10 suspension points
• Feet Twelve (12) 2.36” (60mm) diameter
• Constructed from acetal copolymer,
• mounted in an asymmetrical pattern
• for flexible vertical or horizontal system
• set-up
• Grill Acoustically transparent perforated
• metal with weather-resistant polymer
• coating
• Physical
• Height 27.55” (700mm)
• Width 17.71” (450mm)
• Depth 17.71” (450mm)
• Weight 74 lbs. (34kg)

• Features

• High-output, compact, lightweight Mid/High Module.
  
• 131 dB sustained output.
  
• Wide dispersion, rotatable, integrated Mid/High horn design provides optimized transducer loading and controlled dispersion.
  
• New Patent-Pending 1.75” (44mm) diaphragm titanium compression driver with complex geometry phase plug for higher output and lower distortion performance and neodymium.
  
• Six-inch midrange driver with 1.75” (44mm) neodymium magnetic motor structure for increased control and output and decreased distortion and weight.
  
• Proprietary midrange heat dissipation system controls voice coil temperature, ensures high dynamics and extends transducer lifespan.
  
• Horn-loaded, twelve-inch mid-bass driver with 3.00” (76mm) voice coil assembly and neodymium magnetic motor structure.
  
• Professional, exterior-grade Baltic birch construction with wear-resistant polymer coating.
  
• Proprietary corner and side handle designs for simplified handling and carrying.
  
• Acetal copolymer high impact, low friction feet are asymmetrically located on three sides allowing vertical or horizontal system set up, lock-in and easy cabinet movement.
  
• Four internal corner braces tied to eight M10 suspension points. A total of 24 suspension points are available for custom installation applications.

Related Products

No related products found.