Online Shop
KV2 EX10 Extreme Resolution Active Speaker System (£ each) £1,782.50
Description
The EX10 is a very compact 2-way, high-output, full-range active speaker system. Despite its 10” woofer and remarkably small footprint it successfully takes on many larger 12”models and is favoured by audio visual presentation and rental companies all over the world for its sheer quality and tremendous output. On-board electronics ensure fast, easy set up and complete control with electronic crossovers, phase alignment, equalization and speaker protection integrated into the EX10’s amplifier module.
Applications,
High quality fixed installations.
Portable PA Systems for AV, speech and multimedia playback.
Small to medium-sized Live Music applications.
Mobile DJ (when used with EX2.2 or EX2.5 Active Bass Module).
Floor monitoring applications.
R.R.P. £1,782.50
Our Price: £1,782.50 Inc VAT
Technical Specifications
- System Acoustic
- –3dB response 65Hz -18KHz
- –10dB response 50Hz - 22KHz
- Max SPL long-term 126dB
- Max SPL Peak 129dB
- Crossover Points 1.6 kHz
- High Frequency Compression Driver
- Number of Drivers 1
- Diaphragm Size 1.75 " (44mm)
- Throat Exit Diameter 1.0 " (25.4mm)
- Phase Plug Patented – Complex Geometry
- Diaphragm Material Titanium
- Magnet Type Neodymium
- High Frequency Horn Design
- Horizontal Coverage 100° 1kHz to 10kHz avg.
- Vertical Coverage 80° 1kHz to 10kHz avg.
- Type Constant Directivity
- Overall Dimensions 8.20” x 8.20” (208mm x 208mm)
- Mouth Size 7.48” x 7.48” (190mm x 190mm)
- Throat size 1.0” (25.4 mm)
- Low Frequency Section
- Number of Drivers 1
- Acoustic Design Front Loaded, Bass Reflex
- Woofer Size 10.00”(250mm)
- Voice Coil Diameter 2.50"(63mm) Inside/Outside Epoxy Baked
- Wire Type Copper Clad Aluminum
- Diaphragm Material Epoxy-reinforced Cellulose
- Magnet Type Neodymium
- Magnetic Circuit TransCoil dual voice coil
- Second Static Voice Coil Yoke Mounted Copper Clad Aluminum
- High Frequency Amplifier Specifications
- Type Class AB – Push Pull – Low Intermodulation Design
- Metal Oxide Silicon Field Effect Transistor (MOSFET) output stage
- Transformer Balanced Speaker Output
- Rated Continuous Power 50 Watts
- Distortion <.05% THD
- Operating Bandwidth 1.5kHz – 30kHz
- Cooling Passive – aluminum heatsink
- Forced Ventilation High-capacity fan (variable speed)
- Power Supply Iron core toroidal transformer
- Bass Amplifier Specifications
- Type High-efficiency, Current-enhancing Switch Mode technology with Linear Active Filter
- Rated Continuous Power 450 Watts
- Distortion <.05% THD
- Operating Bandwidth 20Hz – 2kHz
- Cooling Passive – aluminum heatsink
- Forced Ventilation High-capacity fan (variable speed)
- Power Supply Iron core toroidal transformer
- Line input Power
- US 115VAC, 60Hz
- Recommended amperage service 8 Amps
- AC Connector Neutrik Powercon™ NAC3MPA Connector (Included)
- Europe 230VAC, 50Hz
- Recommended amperage service 5 Amps
- AC connector Neutrik Powercon™ NAC3MPA Connector (Included)
- Control Panel
- System Level Control Rotary control (-6db to +6db)
- Monitoring Position Filter 2-position push-button ON / OFF switch
- System Status LED Indicators Green / Red - Power ON / Peak
- Green / Red – Signal Present / Thermal Condition
- ON / OFF Switch 2-position rocker switch
- Signal Input
- Main Signal Input Connector Male XLR
- Signal Impedance 20 KOhms (Balanced Signal)
- Through Signal Output Female XLR
- EX10 Electronic System Controls Electronic band pass crossover filters
- Phase alignment
- Time correction
- Equalization
- Limiting and control of individual amplifier system’s RMS output
- Power supply and amplifier thermal protection
- Construction Features
- Basic Geometric Design Asymmetrical Geometry
- Material 15mm Exterior Grade Baltic Birch
- Finish Ultra wear-resistant black polymer coating
- Hardware One (1) Each Recessed Top Handle
- One (1) Each “M10” Top Hang Point
- Four (4) Each “M6” Top Bracket
- Mount Points Omnimount bracket points on Top
- Two (2) Each Integrated “M10” Side
- Hang Points One (1) Each 1.375” (35mm) Pole Mount
- Grill Acoustically Designed Perforated Metal with Weather-Resistant Polymer Coating
- Physical
- Height 20.23” (514mm)
- Width 12.20” (310mm)
- Depth 12.79” (325mm)
- Weight 48.4 lbs. (22kg)
Features
- High-output, extreme resolution, compact full-range speaker system
- 126 dB sustained output with very high dynamic range and low noise floor
- Integrated active amplification and control electronics with 500 total watts of power
- Complete, on-board speaker system management including equalization, time correction, crossover filters, amplifier overdrive protection, system set-up and output level controls
- Very high quality 50-watt, low IM distortion Class A/B high frequency amplifier with transformer-balanced output
- 450-watt high-efficiency, current-enhancing, Switch Mode Technology, low frequency amplifier with Linear Active Filter
- Compact asymmetrical trapezoidal cabinet design allows for use in stage monitor or under balcony applications.
- Wide dispersion, rotatable, horn assembly design allows optimization and adjustment of the coverage pattern when cabinet is placed in horizontal position.
- Floor Monitoring Filter precisely adjusts equalization and phase response characteristics providing optimized monitoring performance.
- New patent-pending 1.75” (44mm) diaphragm titanium compression driver with complex geometry phase plug for higher output and lower distortion performance and neodymium magnet structure.
- Ten-inch woofer with revolutionary Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lower distortion and provides increased frequency response linearity.
- Professional, Baltic birch construction with wear resistant polymer coating
- Proprietary top handle design for simplified handling and carrying integrates one M10 hang points, OmnimountTM bracket point and four M6 bracket points
- Four steel “fly-clip” anchor points, two on top and two on bottom
- Integral side handle for repositioning
- Two side-mounted M10 hang points
- Top hat for pole mounting applications
- Accessories
- EX2.2 Active Bass Module
- The EX10 can be combined with an EX2.2 Active Bass Module in order to create a formidable, very high output audio system. The EX2.2 is comprised of two 12-inch woofers and features on-board amplification and control electronics with 1000 watts of total power.
- EX10-HBRACKET
- A horizontal U-bracket designed for use with the two side-mounted M10 hang points.
- EX10-VBRACKET
- A vertical U-bracket designed for use with the top handle located M10 hang point. The kit includes a special mounting plate with integral M10 attachment point that replaces the lower top hat assembly.
- EX10-WBX 60.0
- A black OmnimountTM bracket attaches to the top of the cabinet and allows the cabinet to be vertically mounted.
Related Products
