Pro Audio Systems

• Technical Specifications

• MAX OUTPUT POWER 1)
• EIA at 1 kHz and 1% THD FTC 20-20kHz @0.1%THD
• 8 Ω per channel 110 W 100 W
• 4 Ω per channel 160 W 150 W
• 2 Ω per channel 200 2) W 180 2) W
• 8 Ω bridged 320 W 300 W
• 4 Ω bridged 400 2) W 360 2) W
• Max output voltage
• 8 ohms load 30 Vrms
• Peak voltage, no load 50 V
• Distortion etc.
• THD 20Hz-20kHz and 1W to full power 0,05 %
• THD @ 1kHZ and –1dB under clip 0,03%
• DIM 30 at –3dB under clip 0,02 %
• Hum and Noise <-105 dB
• Channel separation @10kHz 70 dB
• Output impedance 30 mΩ
• Slew Rate 25 V/µs
• Inputs
• Gain, selectable [dB] 20, 23, 26, 29,
• 32, 35, 38 ,41
• Impedance 20 kohm
• Common mode rejection 50 dB
• Front Panel
• Gain controls (2) channel A, B 31 pos detent
• Protect indicator (2) yellow LEDs 80°C at heatsink or <12kHz at full power or shorted output
• Clip Indicator (2) red LEDs Fast peak - slow release
• Signal present indicator (2) green LED’s -25 dB below full output
• On Indicator (4) green LEDs DC rail voltage for channel A and B
• Rear Panel
• Input connectors (4) Neutrik Combo XLR type, 3 pin & 1/4” jack
• Input / Link connectors (2) 3-pin Phoenix terminal block
• Output connectors (2) Neutrik 4-pole Speakon connectors
• Switches
• Clip limiter A and B On-Off (switchable)
• Link-switch Ch.A-B
• Power 230 V version 115 V version
• Operation voltage 130 V-265 V AC 65 V – 135 V AC
• Minimum start voltage 70 V 35 V AC
• Full output power at 4ohms 230 V AC 115 V AC
• Peak inrush current (Soft start limited) 10 A 5 A
• Current Draw @ 4ohms & 230V
• Quiescent power (no load) 0.1 Arms 0.2 Arms
• 1/8 of full power (-9dB) 0.8 Arms 1.6 Arms
• 1/3 of full power (-5dB) 1.5 Arms 3 Arms
• At full power (0 dB) @1 kHz 1% THD 3.3 Arms 6.6 Arms
• Net Dimensions mm (inch) 483 (19”) W x 44 (1.75”) H x 280 (11”) D
• Shipping Dimensions mm (inch) 450 (17.7”) W x 130 (5.1”) H x 500 (19.7”) D
• Net Weight 7.5 kg (17 lbs)
• Shipping Weight 9.1 kg (20 lbs)
• Approvals CE Emission EN 55 103-1, E3
• Immunity EN 55 103-2, E3, with S/N below 1% at normal operation level
• Safety EN 60 065, class I
• THX iP1150T

• Features

• 2 x 110 watts @ 8 Ω
  
• 2 x 160 watts @ 4 Ω
  
• 2 x 200 watts @ 2 Ω
  
• (Measured just below clip level, with both channels driven)
  
• Compact design: 1U high
  
• Convection cooling (No fan)
  
• Multiple positions gain switch
  
• Neutrik Combo jack and Phoenix terminal block input connectors
  
• Bridged mono outputs in one SpeakOn connector
  
• Besides the traditionally superb Lab.gruppen sonic performance, there is a full line of features to make the iP family functional in all situations from installation to cost-effective live sound systems:
  
• Multiple positions Gain switch
  
• To meet the demands for a flexible gain structure in the system, Lab.gruppen offers a multiple position gain switch. The maximum amplifier gain can be set to all industry standards: 20, 23, 26, 29, 32, 35,
  
• 38 and 41 dB.
  
• Versatile input connection
  
• With the Neutrik Combo-jack we offer both the professional XLR-type standard and the semi-pro 1/4” TRS phono-jacks. For installations the 3-pin Phoenix terminal block may be handier.
  
• Sophisticated protection circuitry, combining:
  
• - DC protection; protects against infrasonic signals
  
• - VHF protection; protects the loudspeakers against strong very high frequency non-musical signals above the audible range.
  
• - Thermal protection; prevents the amplifier from being overheated. The protection indicators on the front panel are switched on, as a warning, before the protection process is initiated.
  
• - AC protection; shuts down the power supply if the line voltage is outside the operating voltage.
  
• - Clip limiter; prevents severely clipped waveforms from reaching the loudspeakers, whilst maintaining full peak power.

Related Products

No related products found.