Online Shop
Blue Sky SAT 6.5 £549.99
Description
The SAT 6.5 MK II is the first significant upgrade to Blue Sky’s original SAT 6.5. The MK II version includes several upgrades, which both increase performance and reliability.
The Blue Sky 6.5 features a cast aluminum frame, 6.5" hemispherical driver and a 1" dual concentric diaphragm tweeter with integral wave guide for superior off-axis response. Powered by two custom-designed 100-watt amplifiers with a highly optimized electronic crossover, the SAT 6.5 Satellites deliver clean, accurate sound with a reproduction frequency response of 80 Hz to 20 kHz +/– 3.0 dB (200Hz – 10kHz +/– 1.5dB).On the rear panel there is a Power Switch, Voltage Selector Switch, Fuse Holder, Gain Control, 12dB Input Attenuator Switch, LED power indicator, 80Hz High Pass Filter Switch and a balanced XLR Input.
The Blue Sky SAT 6.5 Satellite speakers are housed in MDF enclosures and measure a compact 12" H x 8" W x 10" D. Weighing 28 lbs. (each), the SAT 6.5 powered speakers feature full video shielding, perfect for use near video monitors. The SAT 6.5 Satellite speakers also come standard with four 1/4" x 20 inserts
R.R.P. £732.26
Our Price: £549.99 Inc VAT
Technical Specifications
- SAT 6.5 MK II - Active Satellite
- Input Impedance 10k Ohms balanced
- Common Mode Rejection Ratio 40dB typical 60Hz
- Voltage Sensitivity 200mV = 90dB SPL @ 1M
- Maximum Input Level +24dBu balanced
- Frequency Response +/- 1.5dB 200 to 10kHz
- +/- 3.0dB 80 to 20kHz
- Low Frequency Cutoff -3dB @ 80Hz
- Low Frequency Rolloff 12dB per octave
- System Q 0.707
- Internal Crossover Point 1.5kHz
- System Crossover Slope 4th order Linkwitz-Riley Acoustic
- Enclosure
- Solid 3/4" MDF construction with 1" front and rear baffle
- Viscoelastic energy absorbing front baffle coating
- 1/4"x 20 inserts for attachment of OmniMount type 60 brackets (formerly known as the 100 Series).
- Dimensions are 12" H x 8" W x 10 1/4" D (11.88" with heatsink and tweeter wave guide)
- Weight. 27lbs
- Woofer
- 6 1/2" Hemispherical Woofer
- Long excursion design with a cast aluminum frame
- 1 1/2" aluminum voice coil with vented motor for high power handling
- Copper shorting ring for lower distortion.
- Ultra-Low power compression
- Mica filled polypropylene cone and rubber surround
- Fully video shielded
- Tweeter
- 1" Tweeter
- Dual concentric diaphragm with integral wave guide
- High power handling ferrite motor structure
- Fully video shielded
- Sub 1Khz primary resonance
- Satellite Amplifiers
- Discrete symmetrical bipolar design with localized feedback
- 100-Watts RMS into 4-Ohms for the woofer (limited by protection circuitry)
- 100-Watts RMS into 4-Ohms for the tweeter (limited by protection circuitry)
- THD + Noise less than 0.015% at rated output @1kHz
- XLR balanced input
- Adjustable gain control.
- Computer optimized crossover
Features
- Updated / New Features
- New Vifa XT-25 tweeter, with a ferrite motor structure: This tweeter is the same tweeter that is used in Blue Sky's Big Blue SAT 12 and is slightly more efficient than the previous neodymium version, while also providing better thermal characteristics.
- Gain range attenuator (+12dBu or +24dBu operation): Allows the user to easily optimize the signal to noise ratio
- Redesigned input stage: Improved signal to noise performance, with lower noise floor.
- Improved reliability: Newly designed, individually optimized, driver protection. Protects against both short and long term damage, without negatively impacting sound quality.
- New sealed chamber for tweeter: Eliminates the possibility of any air leaks.
- Dual Voltage Operation: Easily configurable via a dual voltage selector switch (115V or 230V)
- Recessed gain control / trim pot: Less likely to be bumped or adjusted accidentally

