Pro Audio Systems

• Technical Specifications

• SAT 5 MK II- Active Satellite
• Enclosure
• Solid 3/4" MDF construction with 1" front and rear baffle
• M6 X 12mm inserts for attachment of OmniMount type 30 brackets (formerly known as the 75 series).
• Dimensions 10.88” H x 6.62” W x 11.43” D (11.88” with heatsink and tweeter wave guide)
• Weight 24lbs. / 11kg.
• .75” Tweeter
• Dual concentric diaphragm with integral wave guide
• High power ferrite magnet assembly
• Fully video shielded
• 5.25” Hemispherical Woofer
• Cast aluminum frame
• 1.5” voice coil
• Copper shorting ring
• Aluminum alloy cone
• Fully video shielded
• Vented motor structure
• Satellite Amplifier
• Dual 60 Watts into 4-Ohm*
• .01% THD + noise at rated power @ 1 kHz
• *Power is limited by protection circuitry.
• XLR balanced input
• Adjustable gain control
• B00® optimized crossover
• 80Hz filter bypass switch
• General Specifications
• Input Impedance 40k Ohms balanced
• Common Mode Rejection Ratio 40dB typical 60Hz
• Voltage Sensitivity 200mV = 90dB SPL @ 1M
• Maximum Input Level +24dBu balanced
• Frequency Response +/- 1.5dB 200 to 10kHz
• +/- 3.0dB 80 to 20kHz
• Low Frequency Cutoff 80Hz
• Internal High Pass Filter 80Hz 2nd order (selectable)
• Internal Crossover 1.8kHz
• SUB 8 Universal Active Subwoofer
• Enclosure
• .75” MDF with 1” front and rear baffle
• Isolation feet included
• Dimensions 13” H x 16” W x 13.37” D (15.76” with heatsink and grille)
• Weight 48.5lbs / 22kg
• 8” Hemispherical Woofer
• 8-inch high excursion woofer
• Vented motor structure
• Cast aluminum frame
• 2.0 “ voice coil
• Aluminum alloy cone
• Electrical Specification
• Input Voltage 115/230 VAC 50/60Hz switchable
• Wattage 200 Watts
• Fuse 115VAC 2A - 250 V 5x20mm (Time Delay or Slo-Blo)
• 230VAC 1.25A - 250 V 5x20mm (Time Delay or Slo-Blo)
• Amplifier
• Discrete symmetrical bipolar design
• 100 Watts RMS into 4-Ohm
• .01% THD + noise at rated power @ 100 Hz
• XLR balanced input
• Adjustable gain control
• Voltage Sensitivity 100mv=90dB SPL@1m
• Frequency Response (SUB IN - anechoic) 35 to 200Hz
• Typical in room response (SUB IN ) 20 to 200Hz (3000 cubic feet)
• Bass-Management
• Input impedance 20K balanced
• Common mode rejection 40dB typical @ 60Hz
• Maximum Input Level +24dBu balanced
• Output Impedance 200 Ohms balanced
• Nominal gain 0dB
• SUB IN low pass filter None
• Switchable Filter Settings
• SAT 5 Mode
• High Pass Filter None (uses filter in SAT 5)
• Low Pass Filter 80Hz 4th Order
• Universal Mode
• Dual independently tunable state variable high pass and low pass filters
• Frequency Range 50Hz to 160Hz
• Filter Slope 4th Order

• Features

• Application Notes
  
• A ProDesk™ 2.1 system is designed for use in professional desktop music and audio production applications using computers and digital audio workstations, including audio editing, film, video and broadcast post production. Because of the many variables associated with room acoustics, independent subwoofer and satellite level controls are provided. These allow the user to adjust the level of the sats and sub to achieve seamless full-range response, from below 30Hz to beyond 20kHz.<
  
• SAT5
  
• Updated / New Features
  
• Gain range attenuator (+12dBu or +24dBu operation): Allows the user to easily optimize the signal to noise ratio
  
• Redesigned input stage: Improved signal to noise performance, with lower noise floor.
  
• Improved reliability: Newly designed, individually optimized, driver protection. Protects against both short and long term damage, without negatively impacting sound quality.
  
• New sealed chamber for tweeter: Eliminates the possibility of any air leaks.
  
• Dual Voltage Operation: Easily configurable via a dual voltage selector switch (115V or 230V)
  
• Recessed gain control / trim pot: Less likely to be bumped or adjusted accidentally
  
• SUB 8 Universal
  
• Blue Sky International is the industry leader in providing professionals true full-range monitoring systems. The Blue Sky | SUB 8 Universal is the first product from Blue Sky which allows you to add this type of true low frequency extension to your existing nearfield monitors.
  
• In addition the SUB 8 Universal, combined with Blue Sky’s SAT 5 or SAT 5 MK II, forms the highly acclaimed and award winning ProDesk™ Monitoring System.
  
• Compact, accurate and powerful - the Blue Sky | SUB 8 Universal.
  
• General Specifications - SUB 8 Universal Active Subwoofer
  
• Enclosure
  
• .75” MDF with 1” front and rear baffle
  
• Isolation feet included
  
• Dimensions 13” H x 16” W x 13.37” D (15.76” with heatsink and grille)
  
• Weight 48.5lbs / 22kg
  
• 8” Hemispherical Woofer
  
• 8-inch high excursion woofer
  
• Vented motor structure
  
• Cast aluminum frame
  
• 2.0 “ voice coil
  
• Aluminum alloy cone
  
• Electrical Specification
  
• Input Voltage 115/230 VAC 50/60Hz switchable
  
• Wattage 200 Watts
  
• Fuse 115VAC 2A - 250 V 5x20mm (Time Delay or Slo-Blo)
  
• 230VAC 1.25A - 250 V 5x20mm (Time Delay or Slo-Blo)
  
• Amplifier
  
• Discrete symmetrical bipolar design
  
• 100 Watts RMS into 4-Ohm
  
• .01% THD + noise at rated power @ 100 Hz
  
• XLR balanced input
  
• Adjustable gain control
  
• Voltage Sensitivity 100mv=90dB SPL@1m
  
• Frequency Response (SUB IN - anechoic) 35 to 200Hz
  
• Typical in room response (SUB IN ) 20 to 200Hz (3000 cubic feet)
  
• Bass-Management
  
• Input impedance 20K balanced
  
• Common mode rejection 40dB typical @ 60Hz
  
• Maximum Input Level +24dBu balanced
  
• Output Impedance 200 Ohms balanced
  
• Nominal gain 0dB
  
• SUB IN low pass filter None
  
• Switchable Filter Settings
  
• SAT 5 Mode
  
• High Pass Filter None (uses filter in SAT 5)
  
• Low Pass Filter 80Hz 4th Order
  
• Universal Mode
  
• Dual independently tunable state variable high pass and low pass filters
  
• Frequency Range 50Hz to 160Hz
  
• Filter Slope 4th Order
  
• A subwoofer that works...
  
• Bass Extension
  
• Add true bass down to 30Hz (20Hz in-room performance)
  
• Compatible
  
• Use with any nearfield monitor and an ideal match for the Blue Sky SAT 5 / SAT 5 MK II
  
• Adjustable
  
• Easy tune crossover from 50Hz to 160Hz to match your monitors
  
• Sealed Box Design
  
• No port = no port noise = better transient response = greater SLAM!
  
• Easy Setup
  
• Straight forward with excellent customer support, if needed.
  
• is that so...
  
• Q: Can you explain the concept of 2.1?
  
• A: Think of it as removing the LF source from your existing 3–way system and playing it back through a separate box (a subwoofer). Although still part of an integral system, the subwoofer can be placed away from your “mid/hi” speakers to provide the best bass response the room can offer.
  
• Q: Why do I want a system that uses a subwoofer?
  
• A: It’s about real low-end, the kind you can feel. Your recording system is able to record it, the audience will want to hear it and you deserve a true fullrange monitoring system that can accurately reproduce it.
  
• Q: Won’t I perceive a hole in the frequency response because of the subwoofer?
  
• A: No! The use of a sealed cabinet design results in an extremely flat frequency response.
  
• Q:Why don’t your speakers use ports or passive radiators?
  
• A: Ports and Passive radiators can increase the efficiency of a speaker system, but because they resonate, they also negatively impact the transient response of the system. Ports can also add noticeable distortion and noise.
  
• science fiction / fact
  
• Fiction: I don’t need to hear what is going on below “X”Hz
  
• Fact: If you can’t hear it, you can’t mix it—only when you have a full-range monitoring system will you be able to make informed creative decisions. So, don’t settle for the kind of low frequency performance that was around 20 years ago—aspire to that which surpasses what is expected today.
  
• Fiction: I have heard that subs don’t work well in small rooms?
  
• Fact: If you want more consistent LF performance, greater LF extension and mixes that translate better, there is no easier way to reach these goals than to use a Blue Sky subwoofer—especially in a small room!
  
• Fiction: Aren’t subs hard to set up?
  
• Fact: With literally thousands of Blue Sky subwoofer based systems installed in studios around the world, we have developed a simple methodology to help you get it right. And, if you have any questions, we are here to help.

Related Products

Blue Sky The Stand (£ each)

Read More