Online Shop
KV2 Audio KX1.2 compact sub £998.75
Description
KX 1.2 is the smallest subwoofer in the KX series and provides a substantial low frequency output that belies its size. Housing a single 12" Neodymium woofer it is a truly portable unit that can be used to extend the usable frequency range of any KX Audio, KV2 Audio or other third party louspeaker system. Its extended low frequency response and high SPL make is an excellent choice for many applications. On-board electronics ensure fast, easy set up and complete control with stereo electronic crossovers, equalization and speaker protection integrated into the KX1.2's amplifier module.
Applications,
Portable P.A. for Solo Artists, Duos and Live Bands
Mobile DJ Sub bass reinforcement
Stand-alone subwoofer to supplement and existing passive or active system
R.R.P. £998.75
Our Price: £998.75 Inc VAT
Technical Specifications
- System Acoustic Perfomance
- -3dB Response 38Hz - 125Hz
- -10dB Response 32Hz - 125Hz
- Max SPL 127dB
- Crossover Point 125Hz
- Low Frequency Section
- Acoustic Design Twin Asymmetrical loading
- Woofer Size 300mm (12.00")
- Voice Coil Diameter 75mm (3.00")
- Diaphragm Material Epoxy Reinforced Cellulose
- Magnet Type Neodymium
- Design Inside-outside
- Bass Amplifier Specification
- Type High Efficiency Switching
- Rated Continuous Power 500W
- Distortion <.05%
- Operating Bandwidth 32Hz - 125Hz
- Signal Input
- Input Impedance 20Ω
- Input Sensitivity 0.75V rms
- Physical Dimensions
- Height 370mm (14.57"), Width 550mm (21.65"), Depth 570mm (22.44"), Weight 32kg (70.4lbs)
- Power Connector IEC 320
- Recommended Amperage 6A 115V, 3A 230V
- Operating Voltage 100-120V @ 60Hz, 230-250V @ 50Hz
Features
- 500W high-efficiency, high current amplifier.
- 12” neodymium, high output, high efficiency low frequency driver with 3” (75mm) high temperature voice coil assembly and reinforced, treated cellulose cone assembly.
- Double, asymmetric acoustic chambers provide very high loading and high acoustic output.
- Complete, on-board subwoofer management including equalization, crossover filters, amplifier overdrive protection, output level and phase controls.
- Left & Right Stereo or Mono inputs with through signal outputs and high pass outputs.
- Professional, Baltic birch construction with highly resistant polymer coating.
- Two recessed, centre balanced side handles for simplified handling and carrying.
- High impact, low friction feet are located on bottom. Registered cut-outs are placed on top of cabinet allowing for interlocking and stacking of multiple cabinets.
- Top hat for pole insertion and speaker placement.
- LED indicators for signal present, limiter, thermal condition and power ON status.
