Online Shop
Drawmer MX60 Front End One, mic/line/instrument pre-amp £354.98
Description
The MX60 Front End One is a unique mic/line/instrument input channel in a single rack space providing high quality Drawmer processing prior to tape/hard disc recording. The MX60 is also ideally suited to project studio and live sound applications. Functioning as a studio grade mic pre-amp, Program AdaptiveTM gate, de-esser, compressor, limiter, three band EQ and multi band tube saturation stage, the MX60 offers the user more options than competitive units currently available.
Grass Roots - The MX60 draws its technology from the most successful of Drawmer products. The mic pre-amp features the same discrete component design found in the legendary Drawmer 1960, the de-esser is derived from the MX50, the VCA based compressor is similar to the MX30, while the peak limiter and gate can be tracked back to the DL241 compressor/limiter.
R.R.P. £405.38
Our Price: £354.98 Inc VAT
Technical Specifications
- (Measurements taken using +4dBu balanced XLR input where applicable)
- INPUT IMPEDANCES
- LINE 20K Ohm
- MIC 150 Ohm to 600 Ohm
- AUX 1M Ohm
- MAXIMUM INPUT LEVEL +21dBu
- INPUT CMR better than -40dB (20Hz - 22kHz)
- OUTPUT IMPEDANCE 100 Ohms
- MAXIMUM OUTPUT LEVEL +20dBu
- BANDWIDTH 16Hz to 28KHz -1dB
- CROSSTALK at 10KHz -94dB at 1KHz -100dB
- NOISE Wideband (worst case) 22Hz - 22KHz
- AV -85dB -105dB
- DISTORTION
- Typical Input 100Hz 1KHz 10KHz
- Unity Gain
- (+4dBu input <0.05% <0.05% <0.05%
- +19dBu output),
- POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 15 Watts
- FUSE RATING T63mA for 230Volt, T125mA for 115Volt
- CONFORMING TO IEC 127-2
- FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
- CASE SIZE 482mm (w) x 44mm (h) x 200mm (d)
- WEIGHT (incl packaging) 3.2 Kgs
Features
- Input Stage: The input stage may be switched to accept mic, line, or instrument level signals - the XLR mic input has switchable 48V phantom power and phase reverse, while the line input is on both a balanced +4dB TRS jack and an unbalanced -10dB jack. A high impedance Instrument jack is located on the front panel for use with electric guitars, basses, synths and drum machines.
- Program AdaptiveTM Gate: Drawmer's proprietary Program AdaptiveTM circuitry means that all the time constants are automatically optimised for the material being processed. This enables stable gating and eliminates 'chatter' around threshold. Controls via a single variable threshold and switchable fast/slow auto release.
- De-Esser: Floating threshold de-ess operation where the de-esser automatically and continually readjusts its own threshold level. The MX60 de-esser is almost completely automatic requiring the user only to select a switchable male or female setting and to adjust the amount of de-essing required. Only the sibilant sounds are subjected to gain reduction so that the lisping effect of simpler de-essers is avoided.
- EQ: High and low shelving sections as well as fully parametric mid range EQ with variable frequency, 'Q', and ±18dB cut/boost.
- Compressor: High quality VCA compressor based on that of the MX30 and DL241. Both the attack and release times are Program AdaptiveTM leaving the user with only ratio, threshold and make-up gain to adjust.
- Tubesound: Multi band 'tube saturation' allows users to create subtle warming, high frequency effects or out-and-out obvious effects via three separate, independently adjustable audio bands. Low settings on all bands enable replication of classic tube mic sounds.
- Output: The output stage includes a limiter with a preset threshold (+16dB) and a variable master fader with output bargraph metering which sets the overall output level from OFF to +15dB. A two stage soft/hard limiting approach has been adopted with yellow and red LEDs signifying soft (approaching limit point) and hard limiting (hitting limit point).
