Online Shop
Australian Monitor AM.AMIS60 60W, 4 Channel Mixer Amp £293.61
Description
The AMIS60 is a 4 channel, 60 watt mixer amplifier suitable for rack or desk mounting. The amplifier is a self contained compact unit of solid steel construction.
Inputs
The AMIS60 has four universal input channels with separate level controls. Each channel will accept balanced or unbalanced microphone, line and auxiliary inputs. The unit has industry standard XLR microphone sockets and dual RCA auxiliary sockets for each channel. An electronically-balanced 600 ohm telephone input for paging is also provided. An insert point is also featured on the rear panel for those applications where an additional EQ or feedback exterminator may be required.
Outputs
The AMIS60 features 70 volt and 8 ohm isolated transformer outputs, plus a tape recorder output by means of dual RCA sockets. A balanced 700mV XLR output is also provided to feed up to 6 power amplifiers. A vox triggered relay output is also available on the rear panel for activation of external devices from the vox muting circuit. In most cases this would be used as a muting bypass relay, which when used with the appropriate external attenuator will maintain paging levels irrespective of the attenuator setting.
R.R.P. £327.83
Our Price: £293.61 Inc VAT
Technical Specifications
- Power Output 60 Watts RMS
- Maximum Load 80 Ohms @ 70 Volts
- Power Bandwidth 60Hz - 17kHz (- 3dB)
- Frequency Response 60Hz - 23kHz (- 3dB)
- Total Harmonic Distortion 0.5% @ 1 KHz rated power
- Signal To Noise Ratio -74dB with all controls at their centre position
- Tone Controls Bass @ 100Hz: Boost +12dB Cut -12dB; Treble @ 10kHz: Boost +9dB Cut -9dB
- Inputs Four mic/aux universal inputs with XLR female mic sockets and dual RCA aux sockets; 600 ohm transformer balanced telephone paging input
- Input Sensitivity Mic: 1mV @ 200 Ohms; Aux: 150mV @ 47K Ohms
- Outputs Speaker: 70 Volts, 8 Ohms; Tape: 350mV @ 10K Ohms; Line: Balanced 700mV Phantom Power 18 Volts DC on all Mic inputs (rear panel on/off switch)
- Speaker Zone Selection Speaker zone selector, switches line output to 6 separate zones. An "all call" switch overrides all zones.
- Controls 4 Input channel gain controls, 1 Bass control, 1 Treble control, 1 Master gain control, 6 Speaker zone selector, 1 Speaker "all call" selector, Pre-announce defeat switch, Phantom Power on/off switch (on rear panel)
- Indicators Power "on" LED
- Power Source 120VAC 60Hz 3 pin IEC connector; 24VDC
- Power Consumption 125 Watts
- Protection Soft limiter for overload and overdrive protection, plus AC and DC fuses
- Dimensions/Weight 3.5" H x 19" W x 13" D (Chassis Dimensions only). 22lb
- Rack Mounting Standard
- Tone Generators Built-in four tone generator module. Includes Bell, Pre-Announce, Alert and Evac tones
- Muting Built-in VOX muting. Channels 1 and 2 will mute channels 3 and 4.
Features
- VCA Control
- The master volume can be controlled remotely. External VCA control would normally be via a pot connected to a two wire rear panel barrier strip.
- Speaker Zone Selector
- A six position push button speaker zone selector with overriding "all call" is located on the front panel. Each of the six zone selectors switch the 70 volt speaker line output to 6 separate speaker zones. The "all call" selector overrides all 6 zones regardless of their on/off condition and places the 70 volt output to all 6 zones.
- Tone Generator
- The AMIS60 comes standard with an in-built four tone generator module. Tones include Bell, Pre-announce Chime, Alert Tone and Evacuate Tone. Any of these tones may be activated from a simple contact closure connected to the rear panel of the amplifier. A Pre-announce defeat switch is located on the front panel.
- Muting
- VOX muting is standard on the AMIS60. A mic or line signal on channels 1 or 2 will mute channels 3 and 4. The muting function can be disabled via an internal link.
- Phantom Power
- Phantom Power (18V DC) is available from all mic inputs. A rear panel phantom power on/off switch is also provided.
- Protection
- Internal current limiting protects the amplifier from both overload and overdrive conditions. Australian Monitor Installation Series amplifiers feature a protection network that provides greater stability and performance. Our amplifiers are recognised worldwide for their reliability and this is due to the extensive levels of current limiting which protect the amplifiers from both overload and overdrive conditions.
