Online Shop
Australian Monitor AM.IC30 3ch, 30W £156.58
Description
The IC30 is a 3 channel, 30 watt mixer amplifier designed for both AC and 12 volt DC operation. The amplifier is a self contained compact unit of solid steel construction suitable for table or desk mounting. An optional rack mount kit is also available.
Inputs
The IC30 has three universal inputs, each with separate level controls. Each channel will accept balanced or unbalanced microphone or a line/auxiliary input. The unit has industry standard XLR microphone sockets and a single RCA socket for each channel.
Outputs
The IC30 features 100 volt, 70 volt & 4 ohm isolated transformer outputs. A tape recorder output by means of an RCA is also provided.
R.R.P. £172.73
Our Price: £156.58 Inc VAT
Technical Specifications
- Power Output 30 Watts RMS
- Maximum Load 330 Ohms @ 100 Volts
- Frequency Response 70Hz - 15kHz (± 3dB)
- Total Harmonic Distortion 0.3% @ 1 kHz rated power @ 70 Volts
- Signal To Noise Ratio -68dB with all controls at their centre position
- Tone Controls Bass @ 100Hz: Boost +12dB, Cut -12dB; Treble @ 10kHz: Boost +9dB, Cut -9dB
- Inputs Three mic/aux universal inputs with XLR female mic sockets and RCA aux sockets
- Input Sensitivity Mic: 1.5mV @ 200 Ohms; Aux: 75mV @ 47K Ohms
- Outputs Speaker: 100, 70 Volts, 4 Ohms; Tape: 400mV @ 10K Ohms
- Controls 3 Input channel gain controls, 1 Bass control, 1 Treble control
- Metering/Indicators Power ”on“ LED
- Power Sources AC: 230/240V - 50Hz, 110V - 60Hz (special) 3 pin IEC connector; DC: 12 Volts
- Power Consumption 60 Watts (maximum)
- Protection Overdrive protection
- Dimensions/Weight 76mm H x 303mm W x 180mm D (Chassis dimensions only). 8kg
- Rack Mounting Optional IC30RMK rack mount kit
- Tone Generator Optional four tone module ATC5488
- Muting Shorting muting facility included or optional VOX muting module TX3010
Features
- Tone Generator
- The IC30 will accept the ATC5488, an optional, plug-in four tone generator module. The ATC5488 connects to a 7 pin receptacle inside the amplifier and provides Bell, Pre-announce Chime, Alert Tone (AS2220.1) and Evacuate Tone (AS2220.1). Any of these tones can be activated from a simple contact closure which may be wired to the spare terminals on the rear of the amplifier.
- Muting
- The IC30 includes a muting facility where channels 2 and 3 are muted when two terminals on the rear panel of the amplifier are shorted. Alternatively, an optional plug-in VOX muting card (TX3010) is available. With the TX3010 installed, signal on input 1 will automatically mute inputs 2 and 3.
- Protection
- Internal current limiting protects the amplifier from overload and overdrive conditions. Australian Monitor Installation Series amplifiers feature a protection network that provides greater stability and performance. Our amplifiers are recognised worldwide for their reliability and this is due to the extensive levels of current limiting which protect the amplifiers from both overload and overdrive conditions.
