Online Shop
Camco Vortex 200V 3100W@4ohms £3,082.97
Description
Vortex 200V. 200 Volt internal power supply model specially designed to deliver high power into higher impedance loads.
Precision, pure natural sonic performance and total power define the Vortex series. The difference; total care about audio design and integrity.
Pure Sonic Performance
Total precision and transparency is the trademark of the Vortex series, thanks to its careful design eliminating sound-deteriorating drawbacks right from the start. This is also evident in the Vortex Series exceptional low distortion values and excellent signal to noise ratio.
Flexible in Power & Application
The Vortex amplifier can easily switch between applications and speaker setups due to its unique power regime. This consists of an extensive power reservoir, stability down to 1 Ohm loads and the ability to run in Stereo, Bridge Mono and Parallel Mono operation modes.
Designed for Touring & More
With a weight of just 12,4 kg and designed for the demands of touring professionals the 2 RU chassis ensures exceptional reliability. All dynamic protection circuits are the result of the philosophy, “Audio-at-all times”.
R.R.P. £4,194.75
Our Price: £3,082.97 Inc VAT
Technical Specifications
- Stereo 1),
- 16 Ω 1040 W
- 8 Ω 1880 W
- 4 Ω 3100 W
- 2 Ω 2600 W
- Peak 4050 W
- Mono
- 16 Ω 3) 3760 W
- 8 Ω 3) 6200 W
- 4 Ω 3) 5200 W
- 2 Ω 4) 6200 W
- 1 Ω 4) 5200 W
- Peak 4) 8100 W
- Output Circuitry bipolar, Class H
- Frequency Response
- 8 Ω load, 1 dB below rated power 20 Hz - 20 kHz ± 0,15 dB
- Input Impedance 40 kΩ balanced
- Input Gain selectable: 26 dB, 32 dB, or 1,4 V input sensitivity
- Protection Circuits
- inrush-current limitation, protection circuits against power on/off transients, temperature monitoring of transformers and heat-sinks, output DC protection, power transistor control, temperature dependent SOA protection, intelligent mains fuse protection
- Limiter 3 step switchable peak-limiter
- Fan 2 temperature dependent speed-controlled axial fans
- Ground-Lift input ground-lift switch on back panel
- Indicators LED’s for ON, SIGNAL, CLIP, DC, High Temp, Output Current
- Input Connectors 3-pin XLR, male and female per channel, pin 2 = in phase
- Output Connectors 5) One 4-pole SPEAKON connector for each output channel (bi-amping possible)
- Modes Of Operation STEREO, BRIDGE MONO and PARALLEL-MONO
- Options Extended User Interface / E.U.I. — modules for any kind of EQ
- Signal To Noise-Ratio
- 20 Hz - 20 kHz, 8 Ω load
- > 107 dB (unweighted)
- > 110 dB (A-weighted)
- THD+N (typical)
- 20 Hz - 20 kHz, 8 Ω load,
- 3 dB below rated power
- < 0,01 %
- SMPTE (typical)
- 20 Hz - 20 kHz, 8 Ω load,
- 3 dB below rated power
- < 0,01 %
- Damping Factor
- 8 Ω load, 1 kHz and below > 400
- Net Weight 12,4 kg / 27,3 lbs (10,7 kg / 23,6 lbs for Vortex 3 Quadro)
- Shipping Weight 15,0 kg / 33,1 lbs (13,5 kg / 29,8 lbs for Vortex 3 Quadro)
- Dimensions (WxHxD) 483 x 88,9 x 436 mm / 19 x 3,5 x 17,2 inches (19”, 2U)
- Shipping Dim. (WxHxD) 540 x 135 x 615 mm (0,045 m3) / 21,3 x 5,3 x 24,2 inches
- 1) All channels driven, 1 kHz, 1% THD @ 230 VAC 2) Peak Power, component tolerance dependent 3) Mono bridged 4) Parallel mono 5) different at Vortex 3 Quadro
- Subject to technical alterations without prior notice.
Features
- Remote Control Included
- The Vortex Series remote control system allows complete application freedom, from FOH to control room centre, the ability to control and monitor usage comes as a standard feature.
- Optional Controller Module & Audio Network
- All Vortex amplifiers can be upgraded with CAMCO’s advanced controller-modules, converting the Vortex into a complete loudspeaker management system. Network solutions via EtherSound or CobraNet offer stand alone Network option modules or combined DSP and Network modules.
- 6 Years Warranty
- CAMCO amplifiers renowned reliability is backed up by 6 years warranty from date of first purchase.
