Online Shop
Camco Vortex 2.6 860@4ohms £1,799.00
Description
Precision, pure natural sonic performance and total power define the Vortex series. The difference; total care about audio design and integrity.
Pure Sonic Performance
Total precision and transparency is the trademark of the Vortex series, thanks to its careful design eliminating sound-deteriorating drawbacks right from the start. This is also evident in the Vortex Series exceptional low distortion values and excellent signal to noise ratio.
Flexible in Power & Application
The Vortex amplifier can easily switch between applications and speaker setups due to its unique power regime. This consists of an extensive power reservoir, stability down to 1 Ohm loads and the ability to run in Stereo, Bridge Mono and Parallel Mono operation modes.
Designed for Touring & More
With a weight of just 12,4 kg and designed for the demands of touring professionals the 2 RU chassis ensures exceptional reliability. All dynamic protection circuits are the result of the philosophy, “Audio-at-all times”.
R.R.P. £2,590.97
Our Price: £1,799.00 Inc VAT
Technical Specifications
- Full specification data sheet, please CLICK HERE
- Stereo 1),
- 16 Ω 250W
- 8 Ω 480 W
- 4 Ω 860 W
- 2 Ω 1400 W 2)
- Peak 1540 W
- Mono
- 16 Ω 3) 960 W
- 8 Ω 3) 1720 W
- 4 Ω 3) 2800 W
- 2 Ω 4) 1720 W
- 1 Ω 4) 2800 W
- Peak 4) 3080 W
- Output Circuitry bipolar, Class H
- Frequency Response
- 8 Ω load, 1 dB below rated power 20 Hz - 20 kHz ± 0,15 dB
- Input Impedance 40 kΩ balanced
- Input Gain selectable: 26 dB, 32 dB, or 1,4 V input sensitivity
- Protection Circuits
- inrush-current limitation, protection circuits against power on/off transients, temperature monitoring of transformers and heat-sinks, output DC protection, power transistor control, temperature dependent SOA protection, intelligent mains fuse protection
- Limiter 3 step switchable peak-limiter
- Fan 2 temperature dependent speed-controlled axial fans
- Ground-Lift input ground-lift switch on back panel
- Indicators LED’s for ON, SIGNAL, CLIP, DC, High Temp, Output Current
- Input Connectors 3-pin XLR, male and female per channel, pin 2 = in phase
- Output Connectors 5) One 4-pole SPEAKON connector for each output channel (bi-amping possible)
- Modes Of Operation STEREO, BRIDGE MONO and PARALLEL-MONO
- Options Extended User Interface / E.U.I. — modules for any kind of EQ
- Signal To Noise-Ratio
- 20 Hz - 20 kHz, 8 Ω load
- > 107 dB (unweighted)
- > 110 dB (A-weighted)
- THD+N (typical)
- 20 Hz - 20 kHz, 8 Ω load,
- 3 dB below rated power
- < 0,01 %
- SMPTE (typical)
- 20 Hz - 20 kHz, 8 Ω load,
- 3 dB below rated power
- < 0,01 %
- Damping Factor
- 8 Ω load, 1 kHz and below > 400
- Net Weight 12,4 kg / 27,3 lbs (10,7 kg / 23,6 lbs for Vortex 3 Quadro)
- Shipping Weight 15,0 kg / 33,1 lbs (13,5 kg / 29,8 lbs for Vortex 3 Quadro)
- Dimensions (WxHxD) 483 x 88,9 x 436 mm / 19 x 3,5 x 17,2 inches (19”, 2U)
- Shipping Dim. (WxHxD) 540 x 135 x 615 mm (0,045 m3) / 21,3 x 5,3 x 24,2 inches
- 1) All channels driven, 1 kHz, 1% THD @ 230 VAC 2) Peak Power, component tolerance dependent 3) Mono bridged 4) Parallel mono 5) different at Vortex 3 Quadro
- Subject to technical alterations without prior notice.
Features
- Remote Control Included
- The Vortex Series remote control system allows complete application freedom, from FOH to control room centre, the ability to control and monitor usage comes as a standard feature.
- Optional Controller Module & Audio Network
- All Vortex amplifiers can be upgraded with CAMCO’s advanced controller-modules, converting the Vortex into a complete loudspeaker management system. Network solutions via EtherSound or CobraNet offer stand alone Network option modules or combined DSP and Network modules.
- 6 Years Warranty
- CAMCO amplifiers renowned reliability is backed up by 6 years warranty from date of first purchase.
