Online Shop
DPA 4063-FM Miniature Omni Mic, Lo-Sens & DC, Beige £269.98
Description
The DPA 4063-FM is the beige version of the low DC Miniature Microphone DPA 4063, which is designed to match systems delivering down to 3 V power supply. DPA 4063 is acoustically identical with the DPA 4061, but the FET preamp in the input stage is designed for working with the lower supply voltage.
This DPA 4063 is a prepolarised omnidirectional Miniature Condenser Microphone with a 5.4 mm vertical diaphragm specially designed for maximum performance under the often difficult conditions when mounted directly on the human body. Special attention has been taken in the design to deal with the humidity problems that often occur in theatrical applications. By changing the protection grids, the Miniature Microphones can furthermore be acoustically modified according to the placement of the microphone on the body.
R.R.P. £282.00
Our Price: £269.98 Inc VAT
Technical Specifications
- Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
- Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
- Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak; <1% THD up to 120 dB SPL RMS sine
- Preamplifier frequency range: 20 Hz to 50 kHz (+0 dB/-3 dB)
- Output impedance: 30 - 40 Ohm
- Cable drive capability: Up to 300 m (984 ft)
- Supply voltage: 3 - 50 V through DPA adapter
- Microphone length: 12.7 mm (0.5 in)
- Max. SPL, peak before clipping: 138 dB
- Weight: <7.5 g (0.26 oz) incl. cable and MicroDot connector
- Cable length: 1.8 m (5.9 ft)
- Cable colour: Beige
- Colour: Beige
- Dynamic Range: Typ. 97 dB
- S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
- Connector: MicroDot
- Sensitivity, nominal, ±3 dB: 6 mV/Pa; 44,5 dB re. 1 V/Pa
Features
- The noise floor of the DPA 4063 is 26 dB(A) re. 20 µPa and it is able to handle sound pressure levels up to 138 dB SPL peak before clipping occurs. A wide range of connection adapters makes it possible to use the 4063 with close to any professional wireless system available plus 48 V phantom. The DAD3050 and DAD3051 adapters are dedicated low voltage systems.
- Principle of operation: Pressure
- Cartridge type: Pre-polarised condenser element with vertical diaphragm
- Power supply: Min. 3 V - max 50 V through DPA adapter
- Frequency range, ± 2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz, High boost grid: 20 Hz - 20 kHz ±2 dB, 10 dB boost at 12 kHz
- Directional characteristics: Omnidirectional
