Online Shop
C-ducer LP2/3 2 x 3 £95.99
Description
The C-ducer (Capacitive-trans-ducer) is a contact condenser microphone. It is light in weight so as to minimize interference with the vibration of the instrument to which it is attached, and it has a phenomenal dynamic range (the transducer itself has a dynamic capability of >155dB) and can handle the amplitudes within a bass drum without distortion. The frequency response of the transducer is an incredible 0.1Hz to 1MHz, although this is deliberately restricted within the preamplifier to minimize induced noise and interference.
Two lengths of C-ducer tape are available, 3" (7.5cm) and 8" (20cm). The shorter length is suitable for smaller instruments (violin, folk harp, banjo etc), and the longer tape is designed for other acoustic stringed instruments (double-bass, ,cello, acoustic guitar etc), drums and piano.
R.R.P. £105.00
Our Price: £95.99 Inc VAT
Technical Specifications
- Output Impedance 10 Ohms
- Output Type 1/4" jack unbalanced
- Frequency Response 35Hz to 25KHz
- Output voltage (max) 700mV
- S/N ratio 77 dB(A)
- Distortion Less than 0.05%
- Power 1 x 9v battery
Features
- Mono Lithium Battery Powered C-ducer System with 2 x 3" (8cm) C-ducer Tape Microphones. The Pre Amp is powered by a 9V battery with a Balance Control which enables you to pan from tape to tape.
- KIT INCLUDES
- 2 x 3" (8cm) C-ducer Tape, 1 x Pre amp, 1 x reel Hi Low Tape, 4 x Spare Sticky Pads, 1 x Belt Clip, 4 x Cable Clips, 1 x Manual
