Online Shop
Audio Technica U851R Cardioid condenser boundary with PivotPoint™ connector, phantom power only. Features UniGuard™ £193.42
Description
Featuring breakthrough audio and mechanical design innovations, the phantom-powered U851R offers outstanding speech intelligibility and transparent sound quality for surface-mount applications. The microphone is equipped with a PivotPoint™ rotating output connector, UniSteep® filter and UniGuard™ RFI-shielding technology. It accepts interchangeable condenser elements—available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851R is equipped with self-contained electronics, eliminating the need for an external power module.
R.R.P. £239.00
Our Price: £193.42 Inc VAT
Technical Specifications
- ELEMENT Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN Half-cardioid
- (cardioid in hemisphere above mounting surface)
- FREQUENCY RESPONSE 30-20,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
- OPEN CIRCUIT SENSITIVITY –34 dB (19.9 mV) re 1V at 1 Pa
- IMPEDANCE 200 ohms
- MAXIMUM INPUT SOUND LEVEL 134 dB SPL, 1 kHz at 1% T.H.D.
- DYNAMIC RANGE (typical) 108 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 68 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical
- SWITCH Flat, roll-off
- WEIGHT 9.2 oz (262 g)
- DIMENSIONS 4.25" (108.0 mm) long, 3.31" (84.0 mm) maximum width, 0.91" (23.0 mm) height
- OUTPUT CONNECTOR TB3M-type
- CABLE 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors
- OPTIONAL INTERCHANGEABLE ELEMENTS UE-H hypercardioid (100°); UE-O omnidirectional (360°)
- ACCESSORY FURNISHED Soft protective pouch
Features
- Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
- PivotPoint™ rotating output connector allows cable to exit from either the rear or the bottom of the microphone
- Superior off-axis rejection for maximum gain before feedback
- UniGuard™ RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Self-contained electronics eliminate need for external power module
- Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
- Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
- Low-profile design with low-reflectance finish for minimum visibility
- Available in two colors: black (U851R) and white (U851RW)
