Online Shop
Klark Teknik DN500PLUS Dual Compressor / Limiter Expander £798.84
Description
The DN500 Plus series utilises a ‘THAT’s’ chip which features lower distortion, improved dynamic range and faster slew rate.
The DN500 Plus is our dual compressor / limiter / expander which is characterised by its extremely quiet operation, typically >2dB quieter than any comparable product. This alone has made it a broadcast-industry standard for many years. The two channels are linkable for true stereo operation, and both the compressor and expander sections are fitted with their own sidechain inputs.
R.R.P. £1,099.80
Our Price: £798.84 Inc VAT
Technical Specifications
- Input Two
- Type Electronically balanced (pin 3 hot)
- Impedance (Ω)
- Balanced 20k
- Unbalanced 10k
- Side Chain Inputs Two (Compressor) + Two (Expander)
- Type Electronically balanced (tip hot)
- Impedance (Ω)
- Balanced 20k
- Balanced 10k
- Audio Outputs Two
- Type Unbalanced (pin 3 hot)
- Minimum load impedance 600 Ω
- Source impedance <60 Ω
- Maximum level +21dBu
- Performance
- Frequency response (20Hz-20kHz) ± 0.5dB
- Distortion (THD+N) < 0.03% @ 1 kHz,+4dBu
- Equivalent input noise (20Hz-20kHz unweighted) <-94dB
- Compressor
- Threshold -30dB to +20dB
- Ratio 1:1 to 50:1
- Knee 1dB (Hard) to 40dB (soft)
- Envelope switchable auto (attack and release controls disabled) or manual
- Attack (90% capture) 50us to 20ms
- Release (90% recovery) 60ms to 2 secs
- Expander
- Threshold -40dB to +20dB
- Ratio 1:1 to 25:1
- Attack Switchable auto or fixed (2ms)
- Release (90% recovery) 40ms to 2 secs
- Output Gain -10dB to +30dB
- Limited/Clipper
- Threshold 0dB to +20dB
- Power Requirements
- Voltage 110/120/220/240V 50/60Hz
- Consumption <30VA
- Weight
- Nett 5kg
- Shipping 6kg
- Dimensions
- Width 482mm (19 inch)
- Depth 292mm (11.5 inch)
- Height 44.5mm (1.75 inch)
- Terminations
- Audio inputs/outputs 3 pin XLR
- Side-Chain inputs normalled 1/4 inch stereo jack
- Power IEC
- Options
- Security Cover
- Transformer input* / output balancing
- * Input transformer balancing is non retrofittable and has to be specified with order.
Features
- Two channels of full function compression, expansion, limiting and peak clipping in one unit of rack space
- Variable knee control for compression styles from hard to easy
- Auto attack/release mode for inaudible compression and easy set-up
- Manual attack/release mode for creating compression effects
- Advanced VCA design for extremely low noise and distortion
- Flexible expander section features variable ratio for gentle expansion or hard gating
- Separate side chain inputs are provided for compressor and expander sections
- A peak limiter with variable threshold and programme related release provides additional protection
- Peak clipper eliminates transient overload and tracks limiter threshold for total protection
- Additional features include stereo link function, gain reduction meters for both compressor/expander sections and output level meter
