The C 28:4 is one of two mid-power, four-channel amplifiers in the C Series family. Attractively packaged in a 2U chassis, it provides 4 × 700 W output into 4 ohm loads.
C Series amplifiers are uniquely capable of adapting to a wide variety of demanding load conditions. Each channel has an individually configurable Voltage Peak Limiter (VPL™), which allows the output to be optimized for any loudspeaker load – whether a single large subwoofer or a series of small 100/70 V loudspeakers. VPL works in combination with adjustable input gain to achieve maximum headroom regardless of input levels or output impedances.
Every C Series is ready for the NomadLink® network right out of the box. With NomadLink, key amplifier parameters are displayed via DeviceControl software, and remote control of channel mutes and power on/off is under network control.
|Output power (20 Hz-20kHz THD+N=01%) 4ohms||4 x 700W|
|Output power (20 Hz-20kHz THD+N=01%) 8ohms||4 x 700W|
|Output power (20 Hz-20kHz THD+N=01%) 4ohms bridged||600W|
|Output power (20 Hz-20kHz THD+N=01%) 8ohms bridged||1200W|
|Output power (20 Hz-20kHz THD+N=01%) 2ohms||4 x 300W|
|Output power (20-20k Hz, THD<0, 2%) 100v||700W|
|Output connectors||Barrier strip|
|Dimensions (W x H x D)||2U|
|Frequency response (Po=1W, RL=8ohms 0dB, +0.5dB, -1dB)||6.8 Hz - 34.2 kHz|
|S/N ratio (DIN audio)||>112dB|
|Distortion (THD full rated power 8 ohms)||20 Hz - 20 kHz for 1 W <0.1%|
|Amplifier protection type||Fan|
|Market Sector||Place of Worship, Theatre, Commercial|