The C 20:8X is the most powerful eight-channel amplifier in the C Series family, delivering an impressive 8 × 250 W at 4 ohms, 8 ohms, 16 ohms or 70 Vrms; 500 W at 100 Vrms is available in bridge mode.
The C 20:8X is one of four C…X models in the C Series, each uniquely suited for a range of installed applications with relatively lower power output requirements. C…X models share most features of the original (higher power) C Series models, and they share the same compact, lightweight 2U chassis. However, the C…X models are offered in both four- and eight-channel versions, offering even greater channel density and installation flexibility. Also, because the unique benefits of Class TD® are more applicable at higher power levels, the C…X models employ a cost-efficient proprietary Class D output design. Other features unique to C…X models include a universal power supply, selectable 35 Hz high-pass filter, and built-in GPIO control facilities.
C 20:8X Series amplifiers are uniquely capable of adapting to a wide variety of demanding load conditions. Each channel has an individually configurable Voltage Peak Limiter (VPL™), which allows the output to be optimized for any loudspeaker load – whether a single large subwoofer or a series of small 70 V loudspeakers (100 V in bridge mode). VPL works in combination with adjustable input gain (adjustable in 4-channel blocks) to achieve maximum headroom regardless of input levels or output impedances. Additionally a 35 Hz high pass filter may be inserted in each 4-channel section.
Every C Series amplifier is ready for the NomadLink® network right out of the box. With NomadLink, key amplifier parameters are displayed via DeviceControl software, and remote control of channel mutes and power on/off is under network control.
GPIO facilities – provided exclusively on C…X models – allow access to key amplifier functions such as power on/off and fault reporting.
|Output power (20 Hz-20kHz THD+N=01%) 4ohms||8 x 250W|
|Output power (20 Hz-20kHz THD+N=01%) 8ohms||8 x 250W|
|Output power (20 Hz-20kHz THD+N=01%) 4ohms bridged||250W per channel|
|Output power (20 Hz-20kHz THD+N=01%) 8ohms bridged||500W per channel|
|Output power (20 Hz-20kHz THD+N=01%) 2ohms||125W|
|Output power (20-20k Hz, THD<0, 2%) 100v||250W|
|Output connectors||Barrier strip|
|Dimensions (W x H x D)||2U|
|Frequency response (Po=1W, RL=8ohms 0dB, +0.5dB, -1dB)||3.2 Hz - 34.2 kHz|
|S/N ratio (DIN audio)||>112dB|
|Distortion (THD full rated power 8 ohms)||20 Hz - 20 kHz for 1 W <0.1%|
|Amplifier protection type||Fan|
|Market Sector||Place of Worship, Theatre, Commercial|